Hampton Bay Ceiling Fan Manual Windward Iv 52 Inch
Home » Hampton Bay Ceiling Fans » Hampton Bay Windward 44 in. Indoor Brushed Nickel Ceiling Fan Manual. What You Must Know About Hampton Bay Windward Ceiling Fan. Mondrian 52 inch Indoor Brushed Nickel Ceiling Fan Manual July 15, 2018.
I have 2 wall switches. 4 wires coming out of ceiling (black-hot, red-hot, white-common, bare- ground), a ceiling fan and a remote. How do I wire them and still be able to use wall switches? I can wire the ceiling fan and just leave the red wire capped with a wire nut, but that leave a useless switch in the wall. The ceiling fan that was up before had a remote and the switches on the wall worked ( 1 switch had to be on in order for the remote to work, and the other controlled power to the fan).
How do I wire it back like this?. Start by turning off the power at the breaker, and verifying it's off with a non-contact voltage tester. Connect all the bare or green grounding conductors together. Connect the white wire from the ceiling to the white wire on the input side of the remote receiver module and the white wire in the fan. Connect the black wire from the ceiling to the black wire on the input side of the remote receiver module.
Connect the blue wire from the output side of the remote receiver module to the blue wire in the fan. Connect the red wire from the ceiling to the black wire in the fan. Cap off the black and white wire from the output side of the remote receiver module. Now when one switch is on, the remote will control the light. The other switch will turn the fan on and off. Nclex med surg study guide. You'll end up with something like this. Alternatively, you could wire it like this.
This way the remote module will control the fan (when the switch is in the ON position), and the other switch will control the light. This answer assumes the black wire controls the fan, while the blue controls the light kit on the fan. Check the documentation that came with the fixture, for proper wiring instructions. I did this last night at my condo. The fan is a 2018 Hunter remote, no chains.
I wanted to be able to change the fan direction and speed, so I had to use the remote for that. I wanted the light to be controlled from 2 3 pole switches. The switch situation is: single 3 pole by garage entry door. Double switchplate housing a single pole on the left and a 3 pole on the right as you look at it, at the living room/kitchen entrance. Red from ceiling to black from fan and black out of remote. Black #1 from ceiling to blue from fan. Blue from remote is capped off.
Windward Iii Ceiling Fan Manual
White from ceiling to white on remote and white from fan all together. Copper from ceiling to all greens and yellow out of remote. Black #2 from ceiling to black into remote. Works like a charm.
Windward Ceiling Fan 44
A check of the 3 pole next to the single pole under a double switchplate revealed black as the traveler connected to two screws on the 3 pole.